The SPM is a manually loaded stand alone screen/stencil printer which deposits printing medium (e.g.. solder paste) in preparing circuit boards to accept surface mount components. A touch screen interface provides computerized motion control and easy access to all the following system functions:

• Board file creation through Teach which helps you throughout the entire board setup process.
• File management for up to 200 board profiles. Load, save and delete files from either the SPM¡¯s hard drive or to or from the floppy disk.
• System maintenance such as system reset, I/O testing, system backup and system restoration.
• Printing

Specifications:

• Air: 80-125 psig, clean dry, 3 CFM (5.5 to 8.5 Bar at 1.5 liters/second)
• Deposition Area: Double Squeegee(508mmX 406mm), Single Squeegee(508mmX 432mm)
• Squeegee Head: Dual Squeegee blades, Free Floating.
• Stroke Speed: 9.5 to 127mm/sec.
• Print Stroke Max: 457mm
• Pressure Range (0 to 23kg). Automatic Pressure Compensation for Snap- off Adjustment.
• PCB Size: Minimum: 76mm X 51mm, Maximum: 521mm X 470mm
• Print Modes: Alternate, Multiple2, Multiple3, Multiple4, Flood/ Print, Print/Flood.