Journal Publications (In Reverse Chronological Order)
  1. Damodaran, P. & Srihari, K., 'Mixed Integer Formulation to Minimize Makespan in a Flow Shop with Batch Processing Machines', Mathematical and Computer Modeling, Vol.40, No.13, 2005, pp. 1465-1472.
  2. Wable, G., Damodaran, P., Chu, Q., & Srihari, K., 'A Systematic Procedure for the Selection of a Lead-Free Solder Paste at an Electronics Manufacturing Environment', Journal of Soldering and Surface Mount Technology, Vol.17, No.2, 2005, pp. 32-39.
  3. Batra, P., Ramachandran, P., Sathyanarayanan, P., Lu, S., & Srihari, K., 'Reliability Enhancement of Electronic Packages by Design of Optimal Parameters', Journal of Microelectronics Reliability (Accepted - To Appear).
  4. Gnanasambandam, S., Primavera, A.A., & Srihari, K., 'The Reliability of Electronics Packages-An Expert Systems Approach', International Journal of Advanced Manufacturing Technology (Accepted - To Appear).
  5. Mohammand, Y., Srihari, K., Pitaressi, J.M., & Primavera, A.A., 'Effect of Voids on the Reliability of BGA/CSP Solder Joints', Journal of Microelectronics Reliability (Accepted - To Appear).
  6. Shah, A., Sammakia, B.G., Srihari, K., & Ramakrishna, K., 'A Numerical Study of the Thermal Performance of an Impingement Heat Sink: Fin Shape Optimization', IEEE Transactions on CPMT (Accepted - To Appear).
  7. Mohammed, Y., Primavera, A.A., & Srihari, K., 'Failure Mode and Effects Analysis in Effects Manufacturing', Microelectronics Reliability, Vol.43, No.12, 2003, pp.2077-2086.
  8. Patel, J., Phadnis, S., Srihari, K., & Jusufagic, F., 'Failure Mode and Effects Analysis in Effects Manufacturing', Journal of Surface Mount Technology, Vol.16, No.3, 2003, pp. 19-24.
  9. Murthy, S.T., Srihari, K., & Westby, G.R., 'Solder Paste Hole Fill for the AART Process', Journal of Electronics Manufacturing (Accepted - To Appear).
  10. Tonapi, S.S. & Srihari, K., 'Implementation of the Pin-In-Paste Process in a Contract Assembly Environment', International Journal of Production Research, Vol.38, No.17, 2000, pp. 4535-4553.
  11. Wu, C.H., Kao, S.C., & Srihari, K., 'GDKAT - A Goal Driven Knowledge Acquisition Tool for Knowledge Base Development', The International Journal of Knowledge Engineering and Neural Networks, Vol.17, No.2, 2000, pp. 90-105.
  12. Tonapi, S.S. & Srihari, K., 'Process Optimization Using Designed Experiments in an EMS Provider's Facility', Journal of Surface Mount Technology, Vol.13, No.2, 2000, pp. 16-21.
  13. Huang, C-Y. Srihari, K., & Borgesen, P., 'Optimization of the Substrate Preheat Temperature for the Encapsulation of Flip Chip Devices', International Journal of Advanced Manufacturing Technology, Vol.16, No.1, 2000, pp. 55-64.
  14. Gopalakrishnan, L., & Srihari, K., 'Process Development for BGA Assembly Using a Design of Experiments Approach', International Journal of Advanced Manufacturing Technology, Vol.15, No. 3, 1999, pp. 587-596.
  15. Primavera, A., Sturm, R., Prasad, S., & Srihari, K., 'Factors that Affect Void Formation in BGA Assembly', Journal of SMT, Vol.12, No.1, 1999, pp. 19-26.
  16. Murthy, S.T., Srihari, K., & Westby, G.R., 'Solder Paste Tests for the AART Process', Journal of Electronics Manufacturing, Vol. 8, No.2, 1998, pp. 117-125.
  17. Gopalakrishnan, L., & Srihari, K., 'Solder Paste Deposition Through High Speed Stencil Printing for a Contract Assembly Environment', Journal of Electronics Manufacturing, Vol.8, No.2, 1998, pp. 89-101.
  18. Yang, C-J., Srihari, K., & DiLella, J., 'Issues that Impact the Conversion to a No-Clean Surface Mount Assembly Process', Computers and Industrial Engineering, Vol. 35, No. 1-2,1998, pp. 57-60.
  19. Ramakrishnan, S., Srihari, K., & Westby, G.R., 'A Decision Support System for the Alternative Assembly and Reflow Technology Process', Computers and Industrial Engineering, Vol. 35, No.1-2, 1998, pp. 61-64.
  20. Huang, Y-W., Srihari, K., & Primavera, 'An Experimental Study of the Self Centering of BGA Packages', Journal of Electronics Manufacturing, Vol.7, No.3, 1997, pp. 171-179.
  21. Rielly, L., Srihari, K., & DiLella, J.,'A Systematic Evaluation of Adhesive Deposition for Mixed Technology PCB Assembly', Computers and Industrial Engineering, Vol.33, Nos.1-2, 1997, pp. 385-388.
  22. Chung, C-W., Srihari, K., & Primavera, A., 'Rework of BGA Components', Journal of Electronics Manufacturing, Vol.7, No. 1, 1997, pp. 41-50.
  23. Su, Y.Y., Srihari, K., & Emerson. C.R., 'Profile Identification System for Surface Mount Printed Circuit Board Assembly', Computers and Industrial Engineering, Vol.33, Nos.1-2, 1996, pp. 377-380.
  24. Shih, W., Srihari, K., & Adriance, J.A., 'Expert System Based Placement Sequence Identification for Surface Mount PCB Assembly', International Journal of Advanced Manufacturing Technology, Vol. 11, No. 3, 1996, pp. 413-424.
  25. Shih, W., Huang, Y.W., Srihari, K., & Westby, G.R., 'Yield Estimation Through Component Placement Accuracy Evaluation in Surface Mount PWB Assembly', Journal of Electronics Manufacturing, Vol. 6, No. 1, 1996, pp. 51-63.
  26. Huang, C.Y., Srihari, K., McLenaghan, A.J., & Westby, G.R., 'The Solderability Evaluation of Surface Mount Components Through the Use of Wetting Balance Analysis', Journal of Electronics Manufacturing, Vol. 6, No. 1, 1996, pp. 23-37.
  27. Chu, H-C, Srihari, K., & Emerson, C.R., 'Distributed Artificial Intelligence in Process Control', Computers and Industrial Engineering, Vol. 31, Nos. 1-2, 1996, pp. 397-400.
  28. Wu, C.H., & Srihari, K., 'Automated Knowledge Acquisition for the Surface Mount PWB Assembly Domain', Journal of Intelligent Manufacturing, Vol. 7, No. 3, 1996, pp. 393-398.
  29. Wu, C.H., Srihari, K., & McLenaghan, A.J., 'A Knowledge Based Thermal Profile Identification Advisor', International Journal of Advanced Manufacturing Technology, Vol. 11, No. 3, 1996, pp. 343-352.
  30. Ku, A., Srihari, K., & DiLella, J., 'Process Planning for Manual PCB Assembly', Computers and Industrial Engineering, Vol. 31, Nos. 1-2, 1996, pp. 181-184.
  31. Su, Y.Y., & Srihari, K., 'Placement Identification Using Artificial Neural Networks', International Journal of Advanced Manufacturing Technology, Vol. 11, No. 2, 1996, pp. 285-299.
  32. Nagarajan, K., Santos, D., & Srihari, K., 'A Computer Aided Cost Estimation System for Surface Mount PCB Assembly', Computers and Industrial Engineering, Vol. 31, Nos. 1-2, 1996, pp. 119-122.
  33. Cala, M., Srihari, K., & Emerson, C.R., 'Process and Production Planning for Circuit Board Assembly', IIE Transactions, Vol. 27, 1995, pp. 90-95.
  34. Chung, C.W., Srihari, K., Adriance, J.H., & Westby, G.R., 'A "Closed Loop" System for the Realtime Control of Solder Paste Stencil Printing', Journal of Electronics Manufacturing, Vol. 5, No. 2, 1995, pp. 99-109.
  35. Shih, W., Huang, Y.W., Srihari, K., & Westby, G.R., 'Estimation of Yield Through Component Placement Accuracy in Surface Mount PWB Assembly', Computers and Industrial Engineering, Vol. 29, No. 1, 1995, pp. 607-611.
  36. Krishnan, S., & Srihari, K., 'Design for Manufacturing Using Surface Mount PCB Assembly', International Journal of Advanced Manufacturing Technology, Vol. 10, 1995, pp. 317-329.
  37. Shih, W., & Srihari, K., 'Distributed Artificial Intelligence in Manufacturing System Control', Computers and Industrial Engineering, Vol. 29, No.1, 1995, pp. 199-203.
  38. Huang, Y.W., Srihari, K., Adriance, J.A., & Westby, G.R., 'A Solution Methodology for the Multiple Batch Surface Mount PCB Placement Problem', Transactions of the ASME Journal of Electronic Packaging, Vol. 116, No. 4, 1994, pp. 282-289.
  39. Maria, A., Srihari, K., & Emerson, C.R., 'Solder Advisor - A Knowledge Based Solder Paste Selection System', International Journal of Computer Integrated Manufacturing, Vol.7, No.4, 1994, pp. 229-241.
  40. Srihari, K., Cecil, J.A., & Emerson, C.R., 'A Blackboard Based Process Planning for the Surface Mount Manufacture of PCBs', International Journal of Advanced Manufacturing Technology, Vol. 9, No. 3, 1994, pp. 188-194.
  41. Srihari, K., & Raghavan, S., 'SMT-TAB: A Process Planning System for PCB Assembly Using TAB and SMT', International Journal of Advanced Manufacturing Technology, Vol. 9, No. 4, 1994, pp. 311-323.
  42. Alexander, M., Srihari, K., & Emerson, C.R., 'Cost Based Surface Mount PCB Design Evaluation', The Journal of Electronic Testing: Theory and Applications, Vol. 5, No. 2&3, 1994, pp. 229-238.
  43. Liu, C.Y., Emerson, C.R., & Srihari, K., 'An Expert System Approach to Surface Mount Pick-and-Place Machine Selection', Handbook of Expert Systems Applications in Manufacturing: Structure and Rules, Edited by Mital & Anand, Chapman & Hall, 1993, Chapter 13, pp. 303-320.
  44. Su, Y.Y., & Srihari, K., 'A Knowledge Based Aircraft-Gate Assignment Advisor', Computers and Industrial Engineering, Vol. 25, No. 1, 1993, pp. 123-126.
  45. Masood, A., & Srihari, K., 'RDCAPP - A Realtime Dynamic CAPP System for an FMS', International Journal of Advanced Manufacturing Technology, Vol. 8, No. 6, 1993, pp. 358-370.
  46. Derebail, A., Srihari, K., & Emerson, C.R., 'A Knowledge Based Adhesive Selection Advisor', International Journal of Advanced Manufacturing Technology, Vol. 9, No. 2, 1994, pp. 93-105.
  47. Su, Y.Y., Srihari, K., & Adriance, J., 'A Knowledge Update Mechanism for an Adhesive Advisor', Computers and Industrial Engineering, Vol. 25, No. 1, 1993, pp. 111-114.
  48. Cecil, J.A., Srihari, K., & Emerson, C.R., 'A Review of Petri Nets Applications in Manufacturing', International Journal of Advanced Manufacturing Technology, Vol. 7, No. 3, 1992, pp. 168-177.
  49. Maria, A., & Srihari, K., 'A Review of Knowledge Based Systems in PCB Assembly', International Journal of Advanced Manufacturing Technology, Vol. 7, No. 6, 1992, pp. 368-377.
  50. Srihari, K., & Cala, M., 'Knowledge Based Decision Support for PCB Assembly Using SMT', Computers and Industrial Engineering, Vol. 23, No. 1, 1992, pp. 405-408.
  51. Srihari, K., & Emerson, C.R., 'A Concurrent Engineering Methodology for PCB Assembly', Management of Technology III, Industrial Engineering and Management Press, Norcross, Georgia, 1992, pp.828-837.
  52. Srihari, K., & Emerson, C.R., ' Knowledge Based Management of Technology for PCB Assembly', Management of Technology III, Industrial Engineering and Management Press, Norcross, Georgia, 1992, pp. 838-847.
  53. Cala, M., & Srihari, K., 'An Intelligent Model Based Methodology for Productivity and Quality Management in Surface Mount Assembly Operations', Productivity Management Frontiers III, Industrial Engineering and Management Press, Norcross, Georgia, 1991, pp. 633-639.
  54. Srihari, K., & Muthukrishnan, R., 'An Expert System Methodology for Aircraft-Gate Assignment', Computers and Industrial Engineering, Vol. 21, No. 1, 1991, pp. 101-105.
  55. Derebail, A., & Srihari, K., 'A Knowledge Based System for the Wave Soldering of Printed Circuit Boards', Expert Systems, Vol. 3, No. 1, 1991, pp. 46-51.
  56. Srihari, K., & Emerson, C.R., 'Quality Improvement Through a Knowledge Based Approach to Adhesive Selection for PCB Assembly', Productivity Management Frontiers III, Industrial Engineering and Management Press, Norcross, Georgia, 1991, pp. 613-619.
  57. Raghavan, S., & Srihari, K., 'Computer Aided Process Planning for Tape Automated Bonding', Computers and Industrial Engineering, Vol. 21, No. 1, 1991, pp. 51-55.
  58. Masood, A., & Srihari, K., 'A Knowledge Based Approach to Infrared Reflow Soldering', Computers and Industrial Engineering, Vol. 19, No. 1, 1990, pp. 102-106.
  59. Srihari, K., & Emerson, C.R., 'Petri Nets in Dynamic Process Planning', Computers and Industrial Engineering, Vol.19, No.1, 1990, pp. 447-451.
  60. Srihari, K., & Greene, T.J., 'MACRO-CAPP: A Prototype CAPP System for a FMS Cell', International Journal of Advanced Manufacturing Technology, Vol. 5, No. 1, 1990, pp. 34-51.
  61. Grant, D.A., & Srihari, K., 'Epistemological Problems and Issues in the Design of Intelligent Systems for Industrial Applications', Computers and Industrial Engineering, Vol. 17, No. 1, 1989, pp. 67-72.
  62. Srihari, K., & Greene, T.J., 'A Rule Based Dynamic Prototype CAPP System', Computers and Industrial Engineering, Vol. 17, No. 1, 1989, pp. 240-245.
  63. Srihari, K., & Greene, T.J., 'Alternate Routings in CAPP Implementation for a FMS', Computers and Industrial Engineering, Vol. 15, No. 1, 1988, pp. 41-50.
  64. Srihari, K., & Greene, T.J., 'Job Release Based Upon Facility Attributes', Recent Developments in Production Research, Elsevier Publications, The Netherlands, 1987, pp. 278-284.

Other Journal Publications (In Reverse Chronological Order)

  1. Hinerman, J.B., Srihari, K., & Westby, G.R., 'Comprehensive Guidelines for the Implementation of the AART Process', Future EMS International, Issue 3, March 2000, pp.125-129.
  2. Alexander, M., Srihari, K. & Emerson, C.R., 'Manufacturing Cost Analysis of Surface Mount PCB Designs', The Journal of the Institute of Circuit Technology, Vol. 20, No.4, 1994, pp. 28-32.
  3. Shih, W., Srihari, K., Adriance, J., & Westby, G., 'A Heuristic Approach to Placement Sequence Identification for SMT', Soldering and Surface Mount Technology, No.14, June 1993, pp. 20-24.
  4. Derebail, A., Srihari, K., & Westby, G., 'Knowledge-Based Adhesive Selection for SMT Assemblies', Soldering and Surface Mount Technology, No.11, May 1992, pp. 13-17.
  5. Srihari, K., Emerson, C.R., & Cecil, J.A., 'Expert Process Planning in Real Time', CIM Review - The Journal of Computer Integrated Manufacturing Management, Vol. 7, No.2, 1991, pp. 23-30.
  6. Srihari, K., & Greene, T.J., 'Expert Process Planning for Flexible Manufacturing', CIM Review - The Journal of Computer Integrated Manufacturing Management, Vol. 6, No. 2, 1990, pp. 43-50.
  7. Srihari, K., Cecil, J.A., & Emerson, C.R., 'Modeling Manufacturing with Petri Nets', CIM Review - The Journal of Computer Integrated Manufacturing Management, Vol. 6, No. 3, 1990, pp. 15-21.
  8. Srihari, K., & Greene, T.J., 'Computer Aided Process Planning - A CAD/CAM Interface', CIM Review - The Journal of Computer Integrated Manufacturing Management, Vol. 4, No. 4, 1988, pp. 47- 59.

Journal Papers Under Review

  1. Tonapi, S.S., Borgesen, P., & Srihari, K.,'Systematic Development and Evaluation of the Underfill Process for Fine Pitch, Low Stand-Off Flip Chip Assemblies', ASME Transactions ¨C Journal of Electronics Packaging (Under Review).
  2. Koli, S., Damodaran, P., Kimler, B., & Srihari, K.,'Product Slotting in a Warehouse with Rectangular Layout', Transportation Research Part E: Transportation and Logistics Review (Under Review).
  3. Manjeshwar, P., Damodaran, P., & Srihari, K.,'Minimizing Makespan on Two Batch Processing Machines in a Flowshop', Journal of the Operations Research Society (Under Review).
  4. Damodaran, P., Srihari, K., & Lam, S.S.,'Minimizing Makespan on a Capacitated Batch-Processing Machine with Non-Identical Job Sizes using Simulated Annealing', International Journal of Production Economics (Under Review).
  5. Prabhakumar, A., Zhong, H., Tonapi, S.S., Schattenmann, F., and Srihari, K.,'A Study on the Effective Thermal Conductivity of Silicone and Epoxy-Based Thermal Interface Materials', ASME Transactions ¨C Journal of Electronics Packaging (Under Review).
  6. Manjeshwar, P., Damodaran, P., & Srihari, K.,'Minimizing Makespan on a Batch Processing Machine with Non-Identical Job Sizes Using Genetic Algorithms', International Journal of Production Economics (Under Review).
  7. Wable, G., Chu, Q., Damodaran, P., & Srihari, K.,'Wave Soldering Using Sn/3.0 Ag/0.5 Cu Solder and Water Soluble VOC Free Flux', IEEE Transactions on Electronics Packaging and Manufacturing (Under Review).
  8. Damodaran, P., Chang, P.P., & Srihari, K.,'Comparing Push and Pull Systems for a Job Shop Environment', International Journal of Production Research (Under Review).
  9. Manjeshwar, P., Craik, J., Phadnis, S., & Srihari, K.,'Effectiveness Study of an Automated 3D Laminography X-Ray Inspection System in a High-Volume Low-Mix SMT Line', International Journal of Advanced Manufacturing Technology (Under Review).
  10. Ramakrishnan, S. & Srihari,K., 'Procurement Leadtime Reduction in an EMS Facility Using an Agent System - SUNY Intellipro', Journal of Electronics Manufacturing (Under Review).
  11. Huang, C.Y., Srihari, K., & McLenaghan, A.J., 'The Use of the Wetting Balance for Flux Activity Evaluation', International Journal of Microcircuits and Electronics Manufacturing (Under Review).
  12. Murthy, S.T., Gopalakrishnan, L., Manessis, D., Srihari, K., & Westby, G.R., 'Solder Paste Deposition for Thick Boards for the AART Process', International Journal of Microcircuits and Electronics Manufacturing (Under Review).
  13. Yang, C-J, Srihari, K., & DiLella, J., 'Process Optimization for Ultrafine Pitch Surface Mount Printing', Journal of Electronics Manufacturing (Under Review).
  14. Chung, C-W, Srihari, K., & Primavera, T., 'A Discussion on the Rework of BGAs', International Journal of Advanced Manufacturing Technology (Under Review).
  15. Gowda, A., Primavera, A.A., & Srihari, K.,'Rework of Lead-Free Chip Scale Packages', Journal of Electronics Manufacturing (Under Review).
  16. Damodaran, P., Krishnamurthi, M., & Srihari, K.,'Lower Bounds for Hierarchical Chinese Postman Problem', Computers and Operations Research (Under Review).
  17. Damodaran, P. & Srihari, K.,'Minimizing Makespan in a Single Batch-Processing Machine with Non-Identical Job Sizes and Machine Capacity using Simulated Annealing', European Journal of Operational Research (Under Review).