Search
 
Overview
  • Thesis & Dissertations
  • Journals
  • Conference Papers
    		•
    Publications
    Home > Publications > Journals > Papers (64)
    Journal Publications (In Reverse Chronological Order)

    1. Damodaran, P. & Srihari, K., 'Mixed Integer Formulation to Minimize Makespan in a Flow Shop with Batch Processing Machines', Mathematical and Computer Modeling, Vol.40, No.13, 2005, pp. 1465-1472.
    2. Wable, G., Damodaran, P., Chu, Q., & Srihari, K., 'A Systematic Procedure for the Selection of a Lead-Free Solder Paste at an Electronics Manufacturing Environment', Journal of Soldering and Surface Mount Technology, Vol.17, No.2, 2005, pp. 32-39.
    3. Batra, P., Ramachandran, P., Sathyanarayanan, P., Lu, S., & Srihari, K., 'Reliability Enhancement of Electronic Packages by Design of Optimal Parameters', Journal of Microelectronics Reliability (Accepted - To Appear).
    4. Gnanasambandam, S., Primavera, A.A., & Srihari, K., 'The Reliability of Electronics Packages-An Expert Systems Approach', International Journal of Advanced Manufacturing Technology (Accepted - To Appear).
    5. Mohammand, Y., Srihari, K., Pitaressi, J.M., & Primavera, A.A., 'Effect of Voids on the Reliability of BGA/CSP Solder Joints', Journal of Microelectronics Reliability (Accepted - To Appear).
    6. Shah, A., Sammakia, B.G., Srihari, K., & Ramakrishna, K., 'A Numerical Study of the Thermal Performance of an Impingement Heat Sink: Fin Shape Optimization', IEEE Transactions on CPMT (Accepted - To Appear).
    7. Mohammed, Y., Primavera, A.A., & Srihari, K., 'Failure Mode and Effects Analysis in Effects Manufacturing', Microelectronics Reliability, Vol.43, No.12, 2003, pp.2077-2086.
    8. Patel, J., Phadnis, S., Srihari, K., & Jusufagic, F., 'Failure Mode and Effects Analysis in Effects Manufacturing', Journal of Surface Mount Technology, Vol.16, No.3, 2003, pp. 19-24.
    9. Murthy, S.T., Srihari, K., & Westby, G.R., 'Solder Paste Hole Fill for the AART Process', Journal of Electronics Manufacturing (Accepted - To Appear).
    10. Tonapi, S.S. & Srihari, K., 'Implementation of the Pin-In-Paste Process in a Contract Assembly Environment', International Journal of Production Research, Vol.38, No.17, 2000, pp. 4535-4553.
    11. Wu, C.H., Kao, S.C., & Srihari, K., 'GDKAT - A Goal Driven Knowledge Acquisition Tool for Knowledge Base Development', The International Journal of Knowledge Engineering and Neural Networks, Vol.17, No.2, 2000, pp. 90-105.
    12. Tonapi, S.S. & Srihari, K., 'Process Optimization Using Designed Experiments in an EMS Provider's Facility', Journal of Surface Mount Technology, Vol.13, No.2, 2000, pp. 16-21.
    13. Huang, C-Y. Srihari, K., & Borgesen, P., 'Optimization of the Substrate Preheat Temperature for the Encapsulation of Flip Chip Devices', International Journal of Advanced Manufacturing Technology, Vol.16, No.1, 2000, pp. 55-64.
    14. Gopalakrishnan, L., & Srihari, K., 'Process Development for BGA Assembly Using a Design of Experiments Approach', International Journal of Advanced Manufacturing Technology, Vol.15, No. 3, 1999, pp. 587-596.
    15. Primavera, A., Sturm, R., Prasad, S., & Srihari, K., 'Factors that Affect Void Formation in BGA Assembly', Journal of SMT, Vol.12, No.1, 1999, pp. 19-26.
    16. Murthy, S.T., Srihari, K., & Westby, G.R., 'Solder Paste Tests for the AART Process', Journal of Electronics Manufacturing, Vol. 8, No.2, 1998, pp. 117-125.
    17. Gopalakrishnan, L., & Srihari, K., 'Solder Paste Deposition Through High Speed Stencil Printing for a Contract Assembly Environment', Journal of Electronics Manufacturing, Vol.8, No.2, 1998, pp. 89-101.
    18. Yang, C-J., Srihari, K., & DiLella, J., 'Issues that Impact the Conversion to a No-Clean Surface Mount Assembly Process', Computers and Industrial Engineering, Vol. 35, No. 1-2,1998, pp. 57-60.
    19. Ramakrishnan, S., Srihari, K., & Westby, G.R., 'A Decision Support System for the Alternative Assembly and Reflow Technology Process', Computers and Industrial Engineering, Vol. 35, No.1-2, 1998, pp. 61-64.
    20. Huang, Y-W., Srihari, K., & Primavera, 'An Experimental Study of the Self Centering of BGA Packages', Journal of Electronics Manufacturing, Vol.7, No.3, 1997, pp. 171-179.
    21. Rielly, L., Srihari, K., & DiLella, J.,'A Systematic Evaluation of Adhesive Deposition for Mixed Technology PCB Assembly', Computers and Industrial Engineering, Vol.33, Nos.1-2, 1997, pp. 385-388.
    22. Chung, C-W., Srihari, K., & Primavera, A., 'Rework of BGA Components', Journal of Electronics Manufacturing, Vol.7, No. 1, 1997, pp. 41-50.
    23. Su, Y.Y., Srihari, K., & Emerson. C.R., 'Profile Identification System for Surface Mount Printed Circuit Board Assembly', Computers and Industrial Engineering, Vol.33, Nos.1-2, 1996, pp. 377-380.
    24. Shih, W., Srihari, K., & Adriance, J.A., 'Expert System Based Placement Sequence Identification for Surface Mount PCB Assembly', International Journal of Advanced Manufacturing Technology, Vol. 11, No. 3, 1996, pp. 413-424.
    25. Shih, W., Huang, Y.W., Srihari, K., & Westby, G.R., 'Yield Estimation Through Component Placement Accuracy Evaluation in Surface Mount PWB Assembly', Journal of Electronics Manufacturing, Vol. 6, No. 1, 1996, pp. 51-63.
    26. Huang, C.Y., Srihari, K., McLenaghan, A.J., & Westby, G.R., 'The Solderability Evaluation of Surface Mount Components Through the Use of Wetting Balance Analysis', Journal of Electronics Manufacturing, Vol. 6, No. 1, 1996, pp. 23-37.
    27. Chu, H-C, Srihari, K., & Emerson, C.R., 'Distributed Artificial Intelligence in Process Control', Computers and Industrial Engineering, Vol. 31, Nos. 1-2, 1996, pp. 397-400.
    28. Wu, C.H., & Srihari, K., 'Automated Knowledge Acquisition for the Surface Mount PWB Assembly Domain', Journal of Intelligent Manufacturing, Vol. 7, No. 3, 1996, pp. 393-398.
    29. Wu, C.H., Srihari, K., & McLenaghan, A.J., 'A Knowledge Based Thermal Profile Identification Advisor', International Journal of Advanced Manufacturing Technology, Vol. 11, No. 3, 1996, pp. 343-352.
    30. Ku, A., Srihari, K., & DiLella, J., 'Process Planning for Manual PCB Assembly', Computers and Industrial Engineering, Vol. 31, Nos. 1-2, 1996, pp. 181-184.
    31. Su, Y.Y., & Srihari, K., 'Placement Identification Using Artificial Neural Networks', International Journal of Advanced Manufacturing Technology, Vol. 11, No. 2, 1996, pp. 285-299.
    32. Nagarajan, K., Santos, D., & Srihari, K., 'A Computer Aided Cost Estimation System for Surface Mount PCB Assembly', Computers and Industrial Engineering, Vol. 31, Nos. 1-2, 1996, pp. 119-122.
    33. Cala, M., Srihari, K., & Emerson, C.R., 'Process and Production Planning for Circuit Board Assembly', IIE Transactions, Vol. 27, 1995, pp. 90-95.
    34. Chung, C.W., Srihari, K., Adriance, J.H., & Westby, G.R., 'A "Closed Loop" System for the Realtime Control of Solder Paste Stencil Printing', Journal of Electronics Manufacturing, Vol. 5, No. 2, 1995, pp. 99-109.
    35. Shih, W., Huang, Y.W., Srihari, K., & Westby, G.R., 'Estimation of Yield Through Component Placement Accuracy in Surface Mount PWB Assembly', Computers and Industrial Engineering, Vol. 29, No. 1, 1995, pp. 607-611.
    36. Krishnan, S., & Srihari, K., 'Design for Manufacturing Using Surface Mount PCB Assembly', International Journal of Advanced Manufacturing Technology, Vol. 10, 1995, pp. 317-329.
    37. Shih, W., & Srihari, K., 'Distributed Artificial Intelligence in Manufacturing System Control', Computers and Industrial Engineering, Vol. 29, No.1, 1995, pp. 199-203.
    38. Huang, Y.W., Srihari, K., Adriance, J.A., & Westby, G.R., 'A Solution Methodology for the Multiple Batch Surface Mount PCB Placement Problem', Transactions of the ASME Journal of Electronic Packaging, Vol. 116, No. 4, 1994, pp. 282-289.
    39. Maria, A., Srihari, K., & Emerson, C.R., 'Solder Advisor - A Knowledge Based Solder Paste Selection System', International Journal of Computer Integrated Manufacturing, Vol.7, No.4, 1994, pp. 229-241.
    40. Srihari, K., Cecil, J.A., & Emerson, C.R., 'A Blackboard Based Process Planning for the Surface Mount Manufacture of PCBs', International Journal of Advanced Manufacturing Technology, Vol. 9, No. 3, 1994, pp. 188-194.
    41. Srihari, K., & Raghavan, S., 'SMT-TAB: A Process Planning System for PCB Assembly Using TAB and SMT', International Journal of Advanced Manufacturing Technology, Vol. 9, No. 4, 1994, pp. 311-323.
    42. Alexander, M., Srihari, K., & Emerson, C.R., 'Cost Based Surface Mount PCB Design Evaluation', The Journal of Electronic Testing: Theory and Applications, Vol. 5, No. 2&3, 1994, pp. 229-238.
    43. Liu, C.Y., Emerson, C.R., & Srihari, K., 'An Expert System Approach to Surface Mount Pick-and-Place Machine Selection', Handbook of Expert Systems Applications in Manufacturing: Structure and Rules, Edited by Mital & Anand, Chapman & Hall, 1993, Chapter 13, pp. 303-320.
    44. Su, Y.Y., & Srihari, K., 'A Knowledge Based Aircraft-Gate Assignment Advisor', Computers and Industrial Engineering, Vol. 25, No. 1, 1993, pp. 123-126.
    45. Masood, A., & Srihari, K., 'RDCAPP - A Realtime Dynamic CAPP System for an FMS', International Journal of Advanced Manufacturing Technology, Vol. 8, No. 6, 1993, pp. 358-370.
    46. Derebail, A., Srihari, K., & Emerson, C.R., 'A Knowledge Based Adhesive Selection Advisor', International Journal of Advanced Manufacturing Technology, Vol. 9, No. 2, 1994, pp. 93-105.
    47. Su, Y.Y., Srihari, K., & Adriance, J., 'A Knowledge Update Mechanism for an Adhesive Advisor', Computers and Industrial Engineering, Vol. 25, No. 1, 1993, pp. 111-114.
    48. Cecil, J.A., Srihari, K., & Emerson, C.R., 'A Review of Petri Nets Applications in Manufacturing', International Journal of Advanced Manufacturing Technology, Vol. 7, No. 3, 1992, pp. 168-177.
    49. Maria, A., & Srihari, K., 'A Review of Knowledge Based Systems in PCB Assembly', International Journal of Advanced Manufacturing Technology, Vol. 7, No. 6, 1992, pp. 368-377.
    50. Srihari, K., & Cala, M., 'Knowledge Based Decision Support for PCB Assembly Using SMT', Computers and Industrial Engineering, Vol. 23, No. 1, 1992, pp. 405-408.
    51. Srihari, K., & Emerson, C.R., 'A Concurrent Engineering Methodology for PCB Assembly', Management of Technology III, Industrial Engineering and Management Press, Norcross, Georgia, 1992, pp.828-837.
    52. Srihari, K., & Emerson, C.R., ' Knowledge Based Management of Technology for PCB Assembly', Management of Technology III, Industrial Engineering and Management Press, Norcross, Georgia, 1992, pp. 838-847.
    53. Cala, M., & Srihari, K., 'An Intelligent Model Based Methodology for Productivity and Quality Management in Surface Mount Assembly Operations', Productivity Management Frontiers III, Industrial Engineering and Management Press, Norcross, Georgia, 1991, pp. 633-639.
    54. Srihari, K., & Muthukrishnan, R., 'An Expert System Methodology for Aircraft-Gate Assignment', Computers and Industrial Engineering, Vol. 21, No. 1, 1991, pp. 101-105.
    55. Derebail, A., & Srihari, K., 'A Knowledge Based System for the Wave Soldering of Printed Circuit Boards', Expert Systems, Vol. 3, No. 1, 1991, pp. 46-51.
    56. Srihari, K., & Emerson, C.R., 'Quality Improvement Through a Knowledge Based Approach to Adhesive Selection for PCB Assembly', Productivity Management Frontiers III, Industrial Engineering and Management Press, Norcross, Georgia, 1991, pp. 613-619.
    57. Raghavan, S., & Srihari, K., 'Computer Aided Process Planning for Tape Automated Bonding', Computers and Industrial Engineering, Vol. 21, No. 1, 1991, pp. 51-55.
    58. Masood, A., & Srihari, K., 'A Knowledge Based Approach to Infrared Reflow Soldering', Computers and Industrial Engineering, Vol. 19, No. 1, 1990, pp. 102-106.
    59. Srihari, K., & Emerson, C.R., 'Petri Nets in Dynamic Process Planning', Computers and Industrial Engineering, Vol.19, No.1, 1990, pp. 447-451.
    60. Srihari, K., & Greene, T.J., 'MACRO-CAPP: A Prototype CAPP System for a FMS Cell', International Journal of Advanced Manufacturing Technology, Vol. 5, No. 1, 1990, pp. 34-51.
    61. Grant, D.A., & Srihari, K., 'Epistemological Problems and Issues in the Design of Intelligent Systems for Industrial Applications', Computers and Industrial Engineering, Vol. 17, No. 1, 1989, pp. 67-72.
    62. Srihari, K., & Greene, T.J., 'A Rule Based Dynamic Prototype CAPP System', Computers and Industrial Engineering, Vol. 17, No. 1, 1989, pp. 240-245.
    63. Srihari, K., & Greene, T.J., 'Alternate Routings in CAPP Implementation for a FMS', Computers and Industrial Engineering, Vol. 15, No. 1, 1988, pp. 41-50.
    64. Srihari, K., & Greene, T.J., 'Job Release Based Upon Facility Attributes', Recent Developments in Production Research, Elsevier Publications, The Netherlands, 1987, pp. 278-284.

     

     
    sitemap | contact us